A kitchen tear-out in Metro Vancouver usually needs a mid-size DIY roll-off for cabinets, counters, and flooring scraps. Volume and weight both matter. You load the bin yourself. Trash King delivers and picks it up when you are done.
Call 604-433-5865 or email quotes@trashking.ca when you are ready to describe the job. Hours: Mon–Fri 9:00–19:00, Sat–Sun 9:00–17:00 (America/Vancouver). Ask about current delivery availability when you call.
What usually comes out of a kitchen tear-out
Most kitchen renovations produce a familiar mix:
- Upper and lower cabinets (wood, particleboard, doors, hardware)
- Countertops (laminate, butcher block, stone scraps)
- Backsplash tile and thinset
- Flooring underlay and old vinyl or laminate
- Sink, faucet, and small fixture pieces
- Drywall patches and trim
- Packaging from the new kitchen once install starts
Appliances may or may not ride in the same load. Confirm fridge, range, dishwasher, and microwave handling when you book so load day is not a surprise.
You do not need a perfect inventory. You need a clear picture so size and weight expectations match what you will actually toss.
Volume vs weight for cabinets, counters, tile, and appliances
Cabinets look bulky and eat cube fast if you toss them whole. Break down doors and flatten boxes when you can. That buys space without changing the DIY model.
Tile, stone, and mortar behave differently. They may not fill the bin to the rim, but they get heavy. A load that looks half empty can still be dense. If your tear-out includes a lot of tile or stone, say so when you request a quote.
Counters vary. Laminate is lighter. Stone pieces are dense. Mix matters more than a single “kitchen reno” label.
For live size classes and bin footprints, start at trash bins.
DIY load order that protects cube
A simple kitchen load order keeps the bin usable through the whole tear-out:
- Stage debris near the driveway path before the truck arrives.
- Load heavy or awkward pieces first (stone scraps, dense tile stacks, appliance carcasses if confirmed).
- Flat-stack cabinet sides and shelves to cut air gaps.
- Fill voids with bagged soft goods, trim, and packaging.
- Keep everything under the fill line / rim.
- Spot-check each evening so crowning does not sneak up on pickup day.
Do not climb unstable piles. Keep a clear path from the kitchen to the bin so helpers are not weaving around parked cars.
More loading mechanics live in Trash King’s how-to-load guidance on the site. Use it if your crew is new to roll-offs.
Driveway and access notes before delivery
Private driveway placement is the usual plan for kitchen jobs. Clear the approach, watch overhead wires and low branches, and leave room for the truck to drop and later pull the bin.
If the only option is street or shared strata space, confirm rules yourself before you book that placement. Trash King does not apply for municipal permits for you.
Short driveways and laneway homes are common across Greater Vancouver. Measure what you can and describe access on the call. Photos help.
For driveway-versus-street thinking, pair the kitchen notes above with Trash King’s placement guidance on the site.
What to tell Trash King when you request a quote
Useful kitchen quote lines:
- “Full kitchen tear-out, cabinets and laminate counters, some backsplash tile.”
- “Selective demo: cabinets only, flooring stays.”
- “Gut including tile floor and stone counter scraps. Appliances may go too.”
Add driveway notes, preferred delivery day relative to demo, and whether you expect a mid-project swap if install packaging will be large.
Service area is Metro Vancouver / Greater Vancouver. See greater-vancouver for coverage, then compare DIY roll-off options at bin-rentals-for-junk-removal. Describe the job and get a real quote.
Next step
Plan the tear-out order, then call 604-433-5865 or email quotes@trashking.ca. Hours: Mon–Fri 9:00–19:00, Sat–Sun 9:00–17:00 (America/Vancouver). Ask about current delivery availability when you call.
More reading: trash bins, greater-vancouver, bin-rentals-for-junk-removal.
FAQ
What size bin do I need for a kitchen renovation in Metro Vancouver?
Often a mid-size DIY roll-off fits a typical cabinet-and-counter tear-out. Tile-heavy or whole-kitchen guts with dense materials can change the picture. Describe materials and driveway access when you book.
Can cabinets and counters go in the bin?
Yes for most finished kitchen debris when they are broken down enough to load safely under the rim. Confirm stone, appliances, and any odd materials on the call.
When should the bin arrive relative to demo?
Aim for delivery the morning tear-out starts, or the afternoon before if you need staging space. Idle empty days rarely help. Confirm timing when you call.
What should I keep out of the kitchen reno bin?
Hold paints, solvents, aerosols, and other household chemicals aside. Pause on unknowns and special-handling items. When unsure, ask before you toss.
Do you load the kitchen debris for me?
No. DIY roll-off means you or your helpers load. Trash King delivers the bin and hauls it when you are ready for pickup.